Harmony SD Rubber Series Rubber Tile
Request Samples
Rubber InstallationStatic Dissipative Rubber Flooring
for Light duty and Mission Critical Applications
Static control and aesthetically pleasing don't have to be mutually exclusive properties. Harmony SD is available in ten attractive colors and special Expanded Colors are available, giving architects and designers even more choices of this visually attractive static control floor. This static dissipative style is ideal for use in engineering offices, data centers, server rooms, labs, access flooring installations and emergency call centers. Like all Staticworx® rubber, Harmony SD rubber flooring exceeds the ADA slip resistance requirements and is PVC free and Phthalate free.
Not recommended for:
Class Zero, Munitions, Explosives and Ordinance applications.
We recommend EC ESD Rubber for these applications.
Colors
 Smoke Embers |
 Morning Dew |
 Nantucket Fog |
 Mauve Mist |
 Red Rock |
 New Chestnut |
 Country Comfort |
 Pleasant Valley |
 Mystic Blue |
 Hemlock |
 Antarctica |
 Hudson Bay |
ANSI
Test Methods and Results for Harmony SD Rubber
- ESD STM 97.2- (Voltage Generation of Flooring in Combination with a person)
- Industry Standard Heel Straps with 1meg-ohm resistor, utilized for evaluation.
- All materials (Flooring, Heel Straps) were conditioned at 12% RH for 72 hours before test
- Test completed in 12% RH condition
- The maximum and minimum absolute values from each test is reported
Compliance with ANSI/ESD S20.20-2007
This standard stresses the importance of two test methods when evaluating ESD Control Flooring:
Voltage Measurement on a Person
ANSI/ESD S20.20 suggests that your floor should not generate more than 100 volts on a person's body. Staticworx® Harmony SD Rubber Flooring will not generate more than 10 volts on a person's body. (In conjunction with conductive footwear, using ESD STM 97.2) Resistance Measurement in Combination with a Person - This test method takes into account the person and their footwear. Test results show that Staticworx® static dissipative rubber flooring measures below the ANSI/ESD S20.20 recommended limit of 35 meg-ohms to ground (using ESD STM 97.1)
Specifications
Thickness: 2.0 mm
Tile Size Available: 24 x 24 inches
Roll Size Available: 49.2' x 48"
Electrical Properties: ESD S7.1\ASTM F-150 RH >30% at room temperature
Dissipative: 106 < 109
- Static dissipative.
- 5 year limited wear warranty.
- 10 year limited conductivity warranty.
- 3 colors available for access floor panels.
- 10 colorways in multicolor chip pattern
PVC Free
Maintenance
The advantage of the non-porous surface, of Staticworx® rubber floor coverings, combined with a "StainBlock" high density surface permits easy and inexpensive cleaning. The extremely hard wearing surface of Staticworx® rubber floor coverings offer a whole series of advantages in care and maintenance
Conductive Adhesive Options
| Adhesive Options | Rubber Static Dissipative Tiles and Sheet |
| GroundTack Conductive Adhesive** | No |
| Statbond™ Counductive Adhesive, 1 Part Acrylic** | Yes |
| Non Conductive, Pressure Sensitive Adhesive | No |
| Conductive, 2-Part Epoxy Adhesive | Yes |
| Dry, Conductive Adhesive (available in rolls) |
No |
| Staticfix, flooring installation tape (adhesive alterative), available in rolls | Yes |
